中文版
Phone: 
Email: 
WhatsApp: Description
Product Overview
The TRICONEX 4000094-310 is a Triconex interface cable assembly used to connect a Tricon safety-system chassis with an external termination panel. Available parts references identify it as an output terminal cable assembly, while other supplier catalogs describe the same part number as a cable assembly for Triconex control systems. Interface cables in this architecture use a female connector at the Tricon chassis end and a keyed male connector at the termination-panel end. Standard cable length is commonly 10 ft (3 m), with longer lengths available for compatible termination-panel configurations.
Unlike a controller or I/O module, this component performs a physical signal-interconnection function. Correct connector keying, cable length, termination-panel compatibility, and routing are therefore more important than processor specifications. Personally, I would verify the termination-panel model and existing cable length from the cabinet drawings before approving a replacement.
Technical Specifications — 4000094-310
| Parameter | Value |
|---|---|
| Product Model | 4000094-310 |
| Manufacturer | Triconex |
| Product Type | Output Terminal Cable Assembly |
| System | Triconex Safety Instrumented System |
| Function | Chassis-to-termination-panel signal interconnection |
| Standard Length | 10 ft / 3 m |
| Connector Arrangement | Female chassis connector and keyed male termination-panel connector |
| Cable Type | Multi-conductor interface cable |
| Installation | Tricon chassis and external termination panel |
| Typical Environment | Industrial process-control cabinet |
| Reported Weight | Approx. 0.3–0.5 kg depending on packaging |
| Custom Lengths | Available in 10-ft increments for compatible configurations |
| Compliance | Verify against applicable Triconex system documentation |
Supplier and technical references consistently identify this part number as a Triconex cable assembly, with one reference describing the standard interface-cable arrangement and 10-ft length.
TRICONEX 4000094-310
Key Features and Benefits — 4000094-310
- Provides direct signal connectivity between the Tricon chassis and termination panel.
- Keyed connectors help prevent incorrect connection.
- Standard 10-ft cable length supports common cabinet layouts.
- Supports distributed termination-panel arrangements.
- Suitable for maintenance replacement in installed Triconex systems.
- Simplifies field wiring replacement without redesigning the termination architecture.
- Useful as a stocked spare for safety-system maintenance.
The key consideration is compatibility. A visually similar cable may still be unsuitable if its connector keying, pin assignment, or termination-panel interface differs.
Related Models
4000093-310 — Triconex input terminal cable assembly used for the corresponding input-side interface.
4000098-510 — Triconex cable assembly listed in supplier catalogs as a 10-ft cable for another system interface configuration.
4000103-510 — Triconex cable assembly associated with compatible termination and I/O interface applications.
4409 Safety Manager Module — A Triconex safety-system component referenced by suppliers in connection with this cable family; exact applicability should be confirmed from the system BOM.
Installation and Maintenance — 4000094-310
Before installation, confirm the Tricon chassis model, termination-panel part number, connector keying, cable length, and pinout. Power isolation should follow the site’s approved safety-system maintenance procedure.
Inspect the connectors for bent contacts, contamination, corrosion, or mechanical damage. Route the cable according to the cabinet design and maintain appropriate separation from high-noise power wiring. After installation, verify termination integrity and perform the applicable I/O loop or continuity checks before returning the safety system to service.
Product Warranty — 4000094-310
Warranty terms depend on supplier, condition, and purchase agreement. For critical Triconex spare inventory, records should include the complete part number, cable length, connector condition, inspection results, test status, and warranty period.
The TRICONEX 4000094-310 should be treated as a configuration-specific interface cable rather than a generic replacement cable. Exact termination-panel compatibility should be confirmed before procurement or installation.
