中文版
Phone: 
Email: 
WhatsApp: Description
Product Overview
The Woodward 5466-1000 is a MicroNet Plus power supply module designed for industrial turbine and engine control systems. It accepts a 24 VDC input and uses a two-slot configuration within the MicroNet Plus chassis, providing the power needed by the installed control hardware. Woodward identifies this part as the MicroNet Plus 24 VDC power supply in its current industrial turbine documentation.
This module is particularly relevant in applications where stable DC power is essential to controller availability, I/O operation, and overall system continuity. It is used across control architectures associated with gas turbines, steam turbines, hydro applications, compressors, and related prime-mover equipment. For replacement planning, matching the input voltage, chassis configuration, certification requirements, and installed system revision is important. Personally, I would verify the existing chassis and power architecture before treating this as a direct interchange item.
Technical Specifications — 5466-1000
| Parameter | Value |
|---|---|
| Product Model | 5466-1000 |
| Manufacturer | Woodward |
| Product Type | MicroNet Plus Power Supply Module |
| Power Input | 24 VDC |
| Configuration | 2-slot power supply |
| Series | MicroNet Plus |
| Operating Temperature | 0 to +55°C, according to available technical listings |
| Mounting | MicroNet Plus chassis |
| Dimensions (HxWxD) | Refer to manufacturer documentation |
| Weight | Refer to as-shipped configuration; supplier figures vary |
| Typical Interfaces | Chassis backplane / system power connections |
| Compliance | Certification depends on system configuration; Woodward documentation lists CSA, ATEX, CE LVD/EMC and other approvals for this part |
Woodward documentation specifically lists the 24 VDC, two-slot configuration and associated certification status for this power supply.
Woodward 5466-1000
Key Features and Benefits — 5466-1000
- 24 VDC input for MicroNet Plus control architectures.
- Two-slot format for compatible MicroNet Plus chassis.
- Provides dedicated system power for installed control modules.
- Suitable for critical turbine and engine control environments.
- Supports maintenance and replacement planning for established MicroNet installations.
- Certification compatibility should be checked against the exact application and chassis configuration.
Related Models
5466-1001: MicroNet Plus power supply using a 110 VAC / 125 VDC input configuration.
5466-1002: MicroNet Plus power supply designed for a 220 VAC input configuration.
5501-370: MicroNet TMR power supply using a 24 VDC input, intended for a different MicroNet architecture.
5466-1049: MicroNet TMR Plus kernel power supply used with specific CPU5200-based systems.
Installation and Maintenance — 5466-1000
Before installation, isolate the relevant power source and confirm that the chassis accepts the intended module. Inspect the connector area, PCB condition, module identification, and mechanical alignment before insertion. Avoid forcing the unit into the chassis; improper alignment can damage backplane connectors.
For maintenance stock, record the part number, hardware revision, serial number, and system configuration during incoming inspection. A functional power-up check and alarm/status verification should be completed after replacement.
Product Warranty — 5466-1000
Warranty terms depend on the supplying organization and the condition of the unit, such as new, unused, refurbished, or repaired. For industrial spare-parts procurement, confirm warranty coverage, test documentation, traceability, return conditions, and actual stock status before purchase.
The Woodward 5466-1000 is best treated as a system-specific MicroNet Plus power component rather than a generic 24 VDC power module.
