Description

• Model: 97332573-A01
• Brand: Honeywell
• Series: TC/TK-CCR014
• Core Function: Provides redundant control-network interfacing
• Type: Redundant Network Interface Module
• Key Specs: TK-CCR014 / TC-CCR014, Rev. A01, dual-network architecture
• Typical Application: Honeywell DCS and redundant PLC network systems
• Condition: Verify New Original / New Surplus / Refurbished status before purchase

Product Introduction

Honeywell 97332573-A01 is identified in industrial spare-parts records as the part number for the TK-CCR014 / TC-CCR014 Redundant Network Interface Module. Its role is to provide the network interface used in Honeywell control architectures where redundant communication paths are required. Available records also identify revision A01 and associate the assembly with Honeywell DCS and redundant PLC applications.

For maintenance teams, the important point is the complete identity rather than the number alone. The module is listed as a redundant network interface, and commercial records show a compact assembly of approximately 180 × 160 × 30 mm and about 0.5 kg. Exact electrical interfaces, firmware revision, and system compatibility should be confirmed against the installed Honeywell cabinet documentation before replacement.

Key Technical Specifications

The available identification records consistently link 97332573-A01 with TK-CCR014 / TC-CCR014 and describe it as a redundant network interface module. Because public technical information for this legacy part is limited, temperature, protocol, and environmental ratings should be treated as configuration-dependent unless verified from the original Honeywell documentation.

Honeywell TK-CCR014 97332573-A01

Application and Selection Notes

This module is intended for systems where network availability matters. A redundant interface can help maintain communications when one side of the network architecture develops a fault, but the actual redundancy behavior depends on the complete Honeywell system design.

Typical applications include:

• Honeywell DCS control networks
• Redundant PLC architectures
• Process and petrochemical plants
• Power-generation control systems
• Industrial automation cabinets requiring redundant communications

One detail should not be overlooked: 97332573-A01 is the part number, while TK-CCR014 and TC-CCR014 are the associated model designations found in supplier records. Purchasing teams should therefore record both identifiers on the PO where possible.

For a replacement, compare the existing module’s revision, connector arrangement, cabinet position, network wiring, and firmware before installation. Well, technically the same base model can still require configuration checks when deployed in a different Honeywell controller generation.

Advantages and Limitations

Advantages

• Designed for redundant control-network architectures.
• Associated with Honeywell industrial control systems.
• Compact form factor for cabinet installation.
• Suitable for legacy maintenance and spare-parts programs.
• Part-number traceability is straightforward through the A01 revision.

Limitations

• Publicly available technical documentation is limited.
• Exact network protocol and environmental limits should be confirmed from the installed system manual.
• It should not be treated as a generic Ethernet interface.
• Replacement suitability depends on the complete Honeywell controller and network architecture.

Quality Inspection and Pre-Shipment Checks

1. Incoming inspection: Verify Honeywell identification, 97332573-A01 marking, model designation, revision, serial number, connectors, housing condition, and signs of previous repair.
2. Live test: Where a compatible Honeywell test environment is available, check power-up behavior, controller recognition, network communication, and redundant-path status. Record the results in a Test Report.
3. Electrical checks: Inspect power terminals, connector continuity, grounding, and visible PCB condition. Apply insulation or other electrical tests only where appropriate for the module design.
4. Firmware and configuration verification: Record firmware/build information where accessible and document the network configuration of the original module before shipment.
5. Final QC: Photograph the identification label, protect the module in ESD-safe packaging, add cushioning, and retain the QC record.

Test photos and available Test Reports can be provided with the shipment upon request.

Technical Replacement Risks

Firmware revision mismatch. A replacement module can be electrically correct and still create communication problems if its firmware is incompatible with the installed Honeywell system.

Redundancy configuration errors. Both communication paths must be wired and configured correctly. A single incorrect connection can leave the system operating in a degraded state.

Connector and terminal differences. Never assume pin assignments from memory. Compare the original wiring with the applicable Honeywell drawing before moving conductors.

Network configuration. Addressing and communication parameters should be documented before removal.

ESD damage. Use an antistatic wrist strap and grounded work surface during handling. A network interface module can be damaged without leaving an obvious external mark.

My practical rule here is simple: photograph the original module and every connector before removal. It costs nothing and greatly reduces rework during recommissioning.

Purchase and Logistics Notes

For international procurement, describe the product as Honeywell 97332573-A01 / TK-CCR014 Redundant Network Interface Module, Rev. A01. Specify the actual condition separately as New Original, New Surplus, Refurbished, or Repaired.

Before shipment, request confirmation of:

• Exact part number and revision
• Associated model designation
• Hardware and firmware revision
• Functional test status
• Warranty period
• Country of origin
• Gross weight and package dimensions

For export packaging, use antistatic protection, rigid cushioning, and moisture protection suitable for the transport route. Ensure that the commercial invoice, packing list, and physical label all carry the same part number.

Available supplier records list the unit as a Honeywell redundant network interface and show examples of new-original stock with one-year warranty terms, but actual stock condition and warranty should be confirmed for each transaction.

Quick Conclusion

• 97332573-A01 is associated with the Honeywell TK-CCR014 / TC-CCR014 redundant network interface module.
• The assembly is intended for redundant industrial control-network applications.
• Supplier records list approximately 180 × 160 × 30 mm and 0.5 kg.
• Revision, firmware, connector arrangement, and network configuration should be verified before replacement.
• It is best sourced as an exact Honeywell spare rather than substituted with a generic communications module.

FAQ

What is Honeywell 97332573-A01?

It is the part number associated with the TK-CCR014 / TC-CCR014 redundant network interface module used in Honeywell industrial control architectures.

What is the main function of TK-CCR014?

Its primary role is redundant network interfacing within a Honeywell control-system architecture, supporting continued communications across the configured redundant network arrangement.

Is 97332573-A01 the same as TK-CCR014?

Available supplier records identify 97332573-A01 as the part number for TK-CCR014 and also associate it with TC-CCR014. Confirm the exact designation on the installed hardware before ordering.

What should be checked before replacement?

Check the complete part number, revision, firmware, connector pinout, network settings, cabinet position, and Honeywell controller architecture. Do not rely on the base model name alone.

Is the module suitable for a generic Ethernet application?

No assumption should be made. It is documented as a Honeywell redundant network interface module, so the correct system architecture and configuration must be verified before substitution.

How should it be packaged for international shipment?

Use ESD-safe protection, cushioning around connectors and the PCB assembly, and moisture protection where required. Keep the part number consistent across the commercial invoice, packing list, and product label.