KEBA FB201 | PLC Module and Machine Control Board

Description

Product Overview

The KEBA FB201 is a legacy KEBA PLC module used in industrial machine-control applications. Available equipment references classify it as a rack-mounted PLC module or CPU card, with status indication on the front of the assembly. Other technical listings associate FB201 with KEBA NC-series input/output hardware and Bühler machinery, so the exact function can depend on the installed machine configuration.

This is therefore a component that should be identified from the complete nameplate, cabinet drawing, and controller configuration rather than from the model number alone. The part is reported as discontinued by aftermarket sources and is now primarily relevant to maintenance of existing KEBA-controlled equipment. For older machinery, retaining a tested spare can be useful when software migration or a complete control-system replacement is not practical.

Technical Specifications — FB201

Available supplier information consistently identifies FB201 as a KEBA PLC module, while another equipment reference describes it specifically as an I/O board for Bühler presses. Because these descriptions are not fully consistent, electrical and mechanical specifications should be confirmed against the actual unit before replacement.

KEBA FB201

Key Features and Benefits — FB201

• Designed for KEBA machine-control architectures.
• Rack-mounted industrial automation hardware.
• Front-panel status indicators support maintenance diagnostics.
• Suitable for legacy equipment where the original control architecture remains in service.
• Can serve as a maintenance replacement for installed KEBA systems.
• Compact control-board construction helps preserve existing cabinet layouts.
• Particularly useful where machine-specific programming and hardware dependencies make modernization costly.

Personally, I would treat the FB201 as a configuration-specific spare rather than a universal PLC card. The available references show that its application depends strongly on the host machine and KEBA control architecture.

Related Models

KEBA CP200 Series — Earlier KEBA controller hardware used in industrial machine-control systems and related automation platforms.

KEBA CP300 Series — Higher-performance controller family used in more advanced machine-control applications.

KEBA E-16ANALOG/B — KEBA analog I/O hardware used where temperature, pressure, position, or other continuous signals must be integrated into the control system.

KEBA FB201 I/O Configuration — Some supplier references associate the part with 16 digital inputs and 16 transistor outputs for KePlast-related applications; this configuration should be verified against the physical module before ordering.

Installation and Maintenance — FB201

Before replacement, record the complete part label, hardware revision, connector arrangement, rack position, and machine-control configuration. Back up the applicable PLC or NC application before removing the existing hardware.

Use ESD protection and isolate the control cabinet according to the machine manufacturer’s maintenance procedure. After installation, verify power-up diagnostics, status indicators, communication, I/O response, and machine sequence operation.

Because several secondary references describe the FB201 differently, do not rely on generic specifications when wiring or commissioning a replacement. The machine BOM and original wiring documentation should remain the primary compatibility references.

Product Warranty — FB201

Warranty coverage depends on supplier, condition, and purchase terms. For a critical spare, purchasing records should include the exact part number, hardware revision, serial number where available, visual inspection results, functional-test status, and warranty period.

The KEBA FB201 is best managed as a legacy, machine-specific automation spare. Its reported PLC/rack and I/O applications make configuration verification essential before installation.