中文版
Phone: 
Email: 
WhatsApp: Description
Product Overview
The P0916FJ is a Foxboro I/A Series Type 4 terminal cable assembly used to connect compatible Fieldbus Modules (FBMs) with their associated field termination hardware. Schneider Electric documentation identifies this part number as the 3.0 m Type 4 P/PVC termination cable. The cable provides the physical signal path between the FBM-side connector and the field termination assembly, helping maintain organized and serviceable DCS wiring. It is not an active I/O module and does not perform signal processing itself. This distinction is important when preparing a replacement BOM or troubleshooting an FBM channel. The P0916FJ is particularly relevant to legacy Foxboro I/A Series installations and retrofit work where the existing termination architecture needs to be retained. Schneider’s current documentation also identifies RH916FJ as the newer superseding reference for the same 3.0 m Type 4 P/PVC cable.
Technical Specifications — P0916FJ
| Parameter | Value |
|---|---|
| Product Model | P0916FJ |
| Manufacturer | Foxboro / Schneider Electric |
| Product Type | Terminal Cable Assembly |
| Cable Type | Type 4 P/PVC |
| Cable Length | 3.0 m (9.8 ft) |
| Application | FBM field termination |
| Insulation / Jacket | Polyurethane outer jacket / semi-rigid PVC conductor insulation |
| Typical Conductor | 26 AWG |
| Voltage Rating | 300 V |
| Mounting | Cable assembly with termination hardware |
| System | Foxboro I/A Series |
| Typical Use | FBM I/O signal connection |
| Temperature Rating | Up to +80°C for P/PVC cable |
| Replacement Reference | RH916FJ |
Schneider’s Foxboro documentation specifically lists P0916FJ for the 3.0 m Type 4 P/PVC configuration and shows RH916FJ as its superseding part number.
Foxboro P0916FJ
Key Features and Benefits — P0916FJ
- 3.0 m pre-assembled termination cable.
- Type 4 P/PVC construction.
- Designed for compatible Foxboro FBM installations.
- Provides organized signal routing between FBMs and termination assemblies.
- Simplifies maintenance compared with individually wired point-to-point connections.
- Suitable for legacy I/A Series DCS replacement and retrofit projects.
- Available in a defined cable-length and insulation configuration.
The cable length and Type 4 designation are important. Foxboro offers multiple cable lengths and insulation constructions, so a visually similar cable is not necessarily an equivalent replacement.
Related Models
P0916FH: Type 4 P/PVC termination cable with a 1.0 m length.
P0931RQ: Type 4 P/PVC termination cable with a 2.0 m length.
P0916FK: Type 4 P/PVC termination cable with a 5.0 m length.
RH916FJ: Current superseding reference for the 3.0 m Type 4 P/PVC cable.
Installation and Maintenance — P0916FJ
Before replacement, verify the FBM type, termination assembly, connector arrangement, cable length, and routing path. The cable should be installed without excessive bending or mechanical tension, particularly around the connector ends.
During maintenance, inspect the connector pins, cable jacket, termination points, and strain relief. Check for insulation damage, crushed sections, loose connections, or evidence of chemical or thermal exposure. If intermittent I/O faults occur, test the cable continuity before replacing the associated FBM.
Personally, I would compare the cable length and Type 4 specification before ordering. A wrong-length termination cable can create unnecessary routing problems even when the connector appears compatible.
Product Warranty — P0916FJ
Warranty coverage should be confirmed according to the supplied condition, such as new surplus, refurbished, or tested-used. For critical DCS spares, procurement records should include the complete part number, cable type, length, inspection status, and warranty period.
When sourcing the FOXBORO P0916FJ, verify the 3.0 m Type 4 P/PVC construction and the connected FBM termination architecture. For new-generation replacements, Schneider documentation identifies RH916FJ as the superseding reference.
