中文版
Phone: 
Email: 
WhatsApp: Description
Product Overview
The ELAU MC-4/11/05/230 is a PacDrive MC-4 servo drive designed for synchronized motion-control applications in automated machinery. It provides a 230 VAC-class power interface and a 5 Aeff motor output rating, making it suitable for controlling compatible ELAU servo motors in packaging, converting, and other machine-automation systems. The unit operates from single- or three-phase 220–240 VAC input and uses a 24 VDC control supply. Technical documentation specifies a 1.9 kVA rated power at the 5 Aeff configuration, together with an internal braking circuit for controlled DC-bus energy management. The drive uses the PacDrive control architecture and is associated with SERCOS-based motion communication.
Technical Specifications — MC-4/11/05/230
| Parameter | Value |
|---|---|
| Product Model | MC-4/11/05/230 |
| Manufacturer | ELAU / Schneider Electric |
| Product Type | PacDrive MC-4 Servo Drive |
| Alternate Part Number | 13130246 |
| Rated Input Voltage | 220–240 VAC ±10% |
| Input Phase | 1-phase / 3-phase |
| Mains Frequency | 48–62 Hz |
| Control Supply | 24 VDC −15% / +25% |
| Rated Motor Current | 5 Aeff at 8 kHz |
| Peak Current | 12.5 Aeff for 1 s |
| Rated Power | 1.9 kVA |
| DC Bus Voltage | 260–370 VDC |
| Internal Braking Resistor | 33 Ω |
| Continuous Braking Power | 50 W |
| Peak Braking Power | 5 kW |
| Communication | SERCOS motion interface |
| Feedback | Motor-dependent encoder / resolver interface |
| Protection | IP20 |
| Cooling | Natural convection |
| Operating Temperature | +5 to +45 °C |
| Maximum Temperature | Up to +55 °C with derating |
| Storage Temperature | −25 to +70 °C |
| Relative Humidity | 5–85%, non-condensing |
| Approx. Product Weight | 3.1–3.5 kg |
| Compliance | CE, UL, cUL |
The published ELAU technical data identifies the exact configuration as order number 13 13 02 46 and specifies 220–240 VAC input, 5 Aeff rated current, and 1.9 kVA rated power.
ELAU MC-4/11/05/230
Key Features and Benefits — MC-4/11/05/230
- PacDrive servo amplification for coordinated machine motion.
- 220–240 VAC single- or three-phase supply.
- 5 Aeff continuous motor current rating.
- 12.5 Aeff peak current capability for short-duration acceleration demands.
- Integrated DC-bus braking circuit.
- SERCOS-based communication for synchronized motion control.
- 24 VDC control-power input.
- Natural-convection cooling simplifies cabinet thermal management.
- Suitable for legacy ELAU PacDrive installations where exact drive replacement is required.
Related Models
MC-4/11/03/400 — A 400 VAC-class PacDrive MC-4 servo-drive configuration for higher-voltage machine power systems.
MC-4/11/08/230 — A higher-current member of the MC-4 230 VAC family intended for applications requiring greater servo output capacity.
PacDrive SH Series Motors — ELAU synchronous servo motors commonly used with PacDrive drives for coordinated machine-axis motion.
PacDrive Controller — The supervisory motion controller that coordinates the servo axes and exchanges real-time motion data with compatible MC-series drives.
Installation and Maintenance — MC-4/11/05/230
Before installation, verify the incoming mains voltage, motor rating, feedback type, control-voltage supply, and cabinet grounding arrangement. The manufacturer specifically warns that incorrect connection voltage can damage the drive. Motor cables and feedback wiring should also be separated and routed according to the applicable EMC requirements.
During replacement, record the existing hardware revision, SERCOS configuration, motor parameters, feedback settings, and braking-resistor configuration. Check the DC bus and allow adequate discharge time before servicing. Inspect terminals, cooling paths, and connectors for signs of heat damage or contamination.
Personally, I would verify the exact motor and feedback combination before commissioning a replacement. Matching only the drive current rating is not enough when the PacDrive application depends on stored motor parameters and synchronized axis configuration.
Product Warranty — MC-4/11/05/230
Warranty coverage depends on the supplier and the unit’s condition, including new, unused surplus, refurbished, or tested spare stock. Procurement records should include the exact part number, hardware/software revision, serial number, inspection status, and applicable return terms.
The ELAU MC-4/11/05/230 is a legacy PacDrive servo drive rated for 230 VAC-class machine power and 5 Aeff motor output. Its exact electrical and motion-control configuration should be matched to the installed PacDrive system before purchase or field replacement.
