Description

Product Overview

The B&R 8AC110.60-2 is a digital output module from B&R Industrial Automation’s modular I/O product family. It is designed to provide electrically isolated digital output channels for industrial machine-control applications, allowing a controller to switch external actuators, relays, solenoids, signal lamps, and other field devices. The module is intended for integration into a B&R control architecture where distributed I/O and compact cabinet installation are required. Its terminal-based design supports organized field wiring while the modular construction allows maintenance teams to replace individual I/O hardware without rebuilding the entire control cabinet. As with other B&R automation components, exact electrical compatibility depends on the controller, bus interface, power distribution, and terminal configuration used in the original installation.

Technical Specifications

Publicly available documentation for this exact ordering code is limited, and some secondary listings do not provide a complete electrical data sheet. For procurement, output voltage/current ratings and terminal assignment should therefore be verified against the original B&R documentation or module nameplate rather than inferred from visually similar I/O cards.

B&R 8AC110.60-2

Key Features and Benefits

• Modular digital-output architecture for industrial automation systems.
• Suitable for switching discrete field devices such as valves, relays, and solenoids.
• Compact design helps maintain high I/O density inside control cabinets.
• Structured terminal connections simplify machine wiring and service work.
• Appropriate for replacement-stock management in established B&R installations.
• Supports deterministic machine-control applications when configured with the appropriate B&R controller and I/O architecture.
• Exact part-number matching helps reduce the risk of installing an electrically different output module.

Personally, I would confirm the output channel rating and terminal assignment before approving this part as a direct replacement. B&R modules can share similar mechanical formats while having different electrical functions.

Related Models

B&R 8AC Series — A family of modular automation I/O components covering different digital and analog signal functions.

B&R ACOPOS — B&R motion-control platform commonly integrated with B&R PLC and I/O architectures for coordinated machine automation.

B&R X20 Series — A separate modular I/O platform offering a broad range of digital, analog, and specialized function modules.

B&R 5AC Series — Related B&R control-system hardware used in industrial machine and automation applications.

Installation and Maintenance

Before installation, verify the controller or I/O station, bus architecture, supply voltage, output wiring, terminal block, and configured channel assignment. Confirm the electrical load for every connected output and check whether external protection or suppression is required for inductive devices.

During maintenance, inspect terminal connections, module contacts, power distribution, and field wiring for overheating, looseness, oxidation, or insulation damage. Do not install or remove the module while energized unless the installed B&R system specifically supports the relevant hot-swap procedure.

After replacement, verify module recognition, channel diagnostics, output state, and the response of each connected field device. Record the original hardware identification and configuration for future spare-parts traceability.

Product Warranty

Warranty coverage depends on supplier, stock condition, and purchase agreement. Confirm whether the unit is new, unused original stock, refurbished, tested used, or surplus. For legacy B&R systems, request the exact hardware revision, condition, test status, and warranty period before procurement.

The B&R 8AC110.60-2 should be managed as a controlled automation spare, with electrical specifications and system compatibility verified from the installed configuration before replacement.