Product Overview

The 2CP200.60-1 is a B&R SYSTEM 2010 central processing unit designed for industrial PLC and machine-control applications. B&R identifies it as a CP200 central unit with 128 kB of dual-port RAM, 2 MB of system SRAM, and 2 × 4 kB cache. Its communication resources include one standard RS232 interface plus electrically isolated RS232, RS485/RS422, and CAN interfaces. The RS485/RS422 and CAN interfaces support network-capable system configurations, making this processor suitable for legacy B&R automation architectures requiring serial and CAN-based communication. Application memory is ordered separately through compatible memory modules. B&R lists CE and cULus E115267 industrial-control certifications for this material number.

Technical Specifications — 2CP200.60-1

B&R’s product documentation confirms the 2 MB system RAM configuration, isolated serial/CAN interfaces, and approximately 20 W power requirement.

B&R 2CP200.60-1

Key Features and Benefits — 2CP200.60-1

• Central processor for B&R SYSTEM 2010 automation systems.
• 128 kB dual-port RAM for system communication.
• 2 MB system SRAM.
• Integrated RS232, RS485/RS422, and CAN interfaces.
• Electrically isolated industrial communication ports.
• Network-capable serial and CAN architecture.
• Separate application-memory modules allow system-specific memory configurations.
• Suitable for legacy machine-control and PLC installations.

The integrated communication interfaces are the main practical advantage of this processor. A single CPU can provide several industrial communication paths without relying entirely on external interface modules. B&R also specifies separate application-memory options, so the processor should be evaluated together with its installed memory configuration.

Related Models

2CP100.60-1: SYSTEM 2010 CPU with 128 kB dual-port RAM and 256 kB system RAM.

2CP104.60-1: Related CPU with 128 kB dual-port RAM, 256 kB system RAM, and CAN communication.

2CP210.60-1: Higher-capacity CP210 processor with 6 MB system RAM, CAN interface, MMU, and FPU.

2ME915.90-1: Compatible 2010 application-memory module providing 2 MB SRAM and 2 MB FlashPROM.

Installation and Maintenance — 2CP200.60-1

Before replacement, record the installed application-memory module, CPU configuration, communication wiring, rack position, and connected RS232, RS485/RS422, and CAN devices. Confirm that the replacement CPU has the required memory configuration before commissioning.

During maintenance, inspect the backplane connector and communication interfaces for contamination, mechanical damage, or loose connections. Verify serial termination and CAN bus wiring where applicable. Preserve the existing application program and configuration before removing the processor.

Personally, I would check the separately installed application memory first. The CPU specification alone does not describe the complete memory configuration of an operating SYSTEM 2010 controller.

Product Warranty — 2CP200.60-1

Warranty coverage should be confirmed according to the supplied condition, such as new surplus, refurbished, repaired, or tested-used. For critical PLC spares, procurement records should include the complete material number, hardware revision, application-memory module, inspection status, and applicable warranty period.

When sourcing the B&R 2CP200.60-1, verify the CPU type, installed application memory, communication interfaces, and SYSTEM 2010 rack configuration before purchase. B&R’s official product page confirms the material number and core technical configuration.