中文版
Phone: 
Email: 
WhatsApp: Description
Product Overview
The GJR2395400R1210 corresponds to ABB 83SR06B-E hardware and is associated with the Allen-Bradley Bulletin 150-C85NBD soft starter / motor-control product designation in available product listings. ABB-SIS identifies the complete reference as ABB-83SR06B-E-GJR2395400R1210 and describes the associated unit as an 85 A soft starter with motor protection, 480 VAC supply, and 100–240 VAC control voltage.
The unit is intended for motor starting applications where controlled acceleration and reduced starting stress are required. Its integrated bypass arrangement can reduce heat generation during normal running conditions, while built-in motor-protection functionality provides an additional layer of equipment protection. Because third-party listings sometimes describe the same ordering reference inconsistently, the complete nameplate should be checked before procurement or replacement.
Technical Specifications — GJR2395400R1210
| Parameter | Value |
|---|---|
| Product Model | 83SR06B-E |
| ABB Part Number | GJR2395400R1210 |
| Manufacturer | ABB / associated Rockwell Allen-Bradley product reference |
| Product Type | Soft Starter / Motor Control Unit |
| Rated Current | 85 A |
| Supply Voltage | 480 VAC |
| Control Voltage | 100–240 VAC |
| Motor Protection | Integrated |
| Starting Modes | Multiple start/stop modes |
| Bypass | Integrated bypass arrangement |
| Communication / Protocol | Verify application-specific configuration |
| Mounting | Panel / equipment installation |
| Dimensions (HxWxD) | Verify from equipment documentation |
| Weight | Approx. 3.2 kg reported by ABB-SIS listing |
| Typical Interfaces | Power terminals and control connections |
| Compliance | Verify against the installed system and applicable motor-control standards |
The 85 A rating, 480 VAC supply, 100–240 VAC control voltage, motor protection, and integrated bypass are reported in the ABB-SIS product listing.
ABB GJR2395400R1210
Key Features and Benefits — GJR2395400R1210
- 85 A motor-starting capacity for compatible industrial applications.
- 480 VAC supply rating according to available product information.
- Integrated motor-protection functionality.
- 100–240 VAC control-voltage range.
- Integrated bypass helps limit heat generation after the motor reaches normal operation.
- Multiple starting and stopping modes support different motor-application requirements.
- Suitable for industrial motor-control and MRO spare-parts applications.
- Compact soft-starter architecture can reduce the need for separate starting components.
The main procurement concern is configuration accuracy. Available web listings attach the same identifier to different descriptions, so the nameplate, current rating, supply voltage, and complete ordering designation should be verified against the installed equipment before shipment.
Related Models
83SR06B-E — The primary hardware designation associated with the supplied ABB ordering reference and should be used when cross-checking the equipment nameplate.
83SR Series — Related ABB/BBC motor-control hardware within the same broad product family, with different current and application configurations.
Bulletin 150-C85NBD — Associated Allen-Bradley soft-starter designation shown in ABB-SIS documentation, rated at 85 A with 480 VAC supply and integrated motor protection.
ABB Motor Control Spares — Other ABB motor-control assemblies should be evaluated by exact current rating, supply voltage, control voltage, and application rather than by physical similarity.
Installation and Maintenance — GJR2395400R1210
Before installation, isolate the motor-control circuit according to the site’s electrical safety procedure. Verify motor rated current, line voltage, control voltage, bypass arrangement, and the existing wiring before removing the installed starter.
Inspect power terminals, control terminals, enclosure condition, and identification labels. Check for overheating, loose connections, contamination, or evidence of previous electrical damage. After installation, verify control inputs and protective functions, then perform a controlled motor-start test while monitoring current and acceleration behavior.
Personally, I would confirm the motor nameplate against the starter rating before releasing this unit from spare inventory. An electrically similar soft starter can still be the wrong replacement if the current or control configuration differs.
Product Warranty — GJR2395400R1210
Warranty coverage depends on the supplier and supplied condition. Confirm whether the unit is new, unused surplus, refurbished, or previously installed, and request available inspection or functional-test documentation.
For critical motor-control spares, retain the complete ordering reference, rated current, voltage information, serial number where applicable, inspection status, and storage history. This provides useful traceability during emergency maintenance and prevents incorrect substitution.
