中文版
Phone: 
Email: 
WhatsApp: Description
-
Integration with ABB MasterPiece Controllers
The DSCA114 is categorized within ABB’s MasterPiece communication modules and is associated with the MasterPiece 200 and MasterPiece 200/1 controller families. This establishes its intended system context, but it does not mean that every controller revision or software configuration necessarily accepts the board.
Before replacement, confirm the controller model, installed communication hardware, and configuration requirements. The board should be selected by its complete order number and intended system role, not simply by its physical appearance or general description as a serial communication board.
Where an existing system depends on the DSCA114 for serial data exchange, preserving the configured communication parameters is an important part of maintaining the interface. A replacement board may have the correct interface designation while the overall communication link still depends on settings in the controller and connected equipment.
Mechanical Identification and Procurement
The DSCA114 has a documented net size of 324 mm in length, 234 mm in width, and 18 mm in height, with a net weight of 0.4 kg. These measurements support physical identification and equipment-handling planning.
For procurement, retain the complete designation DSCA114 57510001-AA in quotation requests, purchase orders, and maintenance records. The model name identifies the communication board family, while the order number identifies the requested part more precisely.
The board’s serial interface, controller-family association, and physical dimensions provide the principal identification criteria. Detailed electrical, connector, and software requirements should be evaluated against the intended installation before the board is integrated into an operating control system.
ABB Advant Master -S100 I_O System
Quality Assurance and Testing SOP
Each unit should undergo documented inspection and testing appropriate to its supplied condition. The following procedure defines the checks to request or record before dispatch; actual completion and results must be confirmed for the specific serial-numbered unit.
- Incoming Identification: Check the ABB nameplate, complete part number, product identification, revision markings, and available traceability records.
- OEM Anti-Counterfeit Visual Inspection: Examine labels, connectors, PCB condition, solder joints, component markings, corrosion, contamination, and evidence of unauthorized rework.
- Physical Condition Assessment: Inspect the board and connector interfaces for cracks, bent contacts, damaged components, and signs of overheating.
- Power-On Functional Test: Where the approved test setup permits, apply the specified supply conditions and record available status indicators and diagnostic results. Do not assume that a particular ERR/RUN LED sequence applies to this board.
- Analog Output Testing: Use a calibrated meter or suitable test equipment to verify supported output channels, signal behavior, and readings against the applicable OEM acceptance limits.
- I/O Load Testing: Test representative or all accessible output channels using suitable loads, where the approved fixture and test procedure support this. Record the channel-by-channel results.
- Final Inspection and Packaging: Confirm the order number, model, condition, accessories, and inspection records. Use appropriate electrostatic-discharge protection and protective packaging.
Acceptance requirement: Release the unit only after the required checks have passed and the results are documented. If a complete powered functional test cannot be performed, disclose that limitation before shipment rather than describing the unit as fully tested.
ABB Advant Master -S100 I_O System
ABB Advant Master -S100 I_O System
Procurement-Driven FAQ
Is the ABB DSAO120A 3BSE018293R1 in stock, and what is the overnight shipping cutoff?
Availability must be confirmed against current physical inventory. Request written confirmation of the exact part number, quantity, condition, dispatch location, and order-processing cutoff. Overnight or next-business-day delivery depends on carrier service, destination, customs clearance, and order acceptance time.
How do you verify the condition of obsolete or surplus ABB boards?
Request photographs of the actual unit, its nameplate, serial or traceability information where available, and a written condition statement. Ask for the inspection checklist and any completed functional-test records. Packaging condition alone does not establish electrical functionality.
What warranty and return terms apply if the board is defective?
The quotation should specify the warranty period, coverage start date, return authorization procedure, evidence required for a fault claim, and applicable return freight responsibilities. Obtain these terms in writing before payment; coverage should not be assumed from the product model alone.
Are there firmware or configuration issues engineers should check before installation?
Yes. Confirm the installed controller family, software configuration, I/O definitions, terminal unit, and any applicable firmware requirements. Verify the replacement against the existing system documentation, then complete approved loop checks before resuming process operation.
What information is needed for an accurate quotation?
Provide the complete part number DSAO120A 3BSE018293R1, required quantity, preferred condition, destination country, and required delivery date. If the board is replacing a failed unit, include the existing revision and terminal-unit identification when available. This helps the supplier assess part-number accuracy, stock suitability, shipping options, and testing requirements before order confirmation.
