Name: ABB 5SHY6545L0001 (AC10272001R0101 / 5SXE10-0181) – ...
Price: 4215.00 USD
Availability: InStock

Description

ABB 5SHY6545L0001 (AC10272001R0101 / 5SXE10-0181) – 4500 V / 6500 A Asymmetric Press-Pack IGCT with Factory-Matched Fiber-Optic Gate Drive Unit

The three identifiers describe a factory-matched switching set rather than three independent components. 5SHY6545L0001 is the press-pack IGCT semiconductor die. AC10272001R0101 is the valve-level assembly order code that bundles the IGCT with its dedicated gate driver interface. 5SXE10-0181 is the high-voltage gate drive unit (GDU) pre-integrated into that assembly, providing fiber-optic command isolation and short-circuit protection for the IGCT. The set is cataloged primarily as an asymmetric IGCT for medium-voltage drives, HVDC submodules, and heavy industrial converters.

Parameter	Specification
Device / Assembly Type	Asymmetric Integrated Gate-Commutated Thyristor (IGCT), press-pack power semiconductor; supplied as factory-matched IGCT + gate drive unit set
Ordering Composition	5SHY6545L0001 (IGCT die); AC10272001R0101 (valve-level assembly / order code); 5SXE10-0181 (integrated fiber-optic gate drive unit)
Repetitive Peak Off-State Voltage (VDRM)	4500 V (dominant specification across IGCT-focused sources); isolated listings citing 6500 V appear in supplier catalogs and should be verified against the official ABB datasheet before procurement
Continuous On-State Current (IT)	6500 A (catalog rated current); alternate listings cite 600–1500 A continuous collector current depending on cooling and measurement basis
Peak Turn-Off Current (ITGQM)	6500 A rated; up to 7000 A peak turn-off capability reported in selected distributor specifications
Switching Frequency	Optimized for medium-voltage PWM; typically up to ~1 kHz continuous, with 1600 Hz cited as a maximum switching frequency in alternate listings
Turn-Off Architecture	Snubberless hard gate turn-off; full anode current commutated to the gate terminal via the low-inductance 5SXE10-0181 gate driver, eliminating external RCD snubber circuits
Gate Drive Unit (5SXE10-0181)	Fiber-optic trigger and status feedback; +24 V DC nominal supply (120 mA typical); gate output +15 V / −5 V or ±15 V class; galvanic isolation between control and power sides
Protection Functions	Overcurrent, short-circuit, over-temperature, dv/dt monitoring, and internal arc detection handled by the integrated GDU and AC10272001R0101 interface layer; protective shutdown executable in < 30 μs
Cooling Method	Double-sided press-pack cooling; forced-air or liquid cooling depending on converter power density; ceramic hermetic housing for thermal cycling robustness
Mounting / Clamping Force	40 kN specified press-pack mounting force; 91 mm active housing diameter; precision alignment required for uniform pressure distribution
Junction Temperature Range	−40 °C to +150 °C operating junction; some listings cite −40 °C to +125 °C as the continuous limit, with short-term excursion tolerance to 150 °C
Package / Weight	Press-pack ceramic hermetic package; approximate dimensions 200 × 120 × 50 mm; net weight 2.9 – 3.0 kg for the IGCT module (GDU and carrier add incrementally)
Typical System Platforms	ACS6000 / ACS8000 medium-voltage drives; wind turbine converters (≥5 MW class); PV and energy-storage PCS inverters; STATCOM / SVG; HVDC and FACTS valve submodules; railway traction and heavy industrial drives

Critical note on voltage-class divergence: The 5SHY6545L0001 is consistently identified as a 4500 V / 6500 A asymmetric IGCT across the majority of technical distributor and power-electronics listings, and the 5SXE10-0181 gate driver is documented as a 4.5 kV-class companion unit. However, a minority of supplier pages describe the same numeric set as a 6500 V / 1000 A symmetric IGCT with water-cooled ceramic packaging. That 6500 V framing also appears alongside unrelated ABB part numbers on the same pages and conflicts with the 40 kN / 91 mm press-pack mechanical parameters reported for the 4500 V device. Procurement and replacement decisions should default to the 4500 V asymmetric parameter set unless the specific ABB drive or valve serial configuration explicitly calls for the 6500 V variant.